Mantis 64 & 80 Static Bollards

  • IWA 14 Tested Bollards
  • PAS68 Tested

The Mantis static bollard series are available in different security levels to suit your site requirements. The security bollards only require a very shallow foundation depth.

Heald’s sleek and stylish Mantis 64 & 80 are a static bollard system which are ideal for sites where a high level of protection is required but where integration with modern architecture is also a priority.

Offering high security combined with a fast, low cost installation, The static bollard has been crash tested three times so we can offer you different levels of security. The Mantis 80 has been IWA-14 crash tested to halt a 7.2 tonne truck (18 tonner) travelling at a speed of 80 kph. The Mantis 64 has also been PAS68 crash tested to halt a 7.5 tonne truck travelling at 64 kph, achieving a zero penetration and zero dispersion rating. During the impact, the structure of the bollard remained intact, ensuring continued protection against further attack.

Static Bollards

With foundation depths varying between 250 mm – 300 mm, installation is quick and easy. No pre-casting of the pit is required, nor is any additional rebar. Our fitters can excavate the pit, lower in the Mantis bollard and infill with just over half a cubic metre of concrete in less than an hour.

Our static bollards are available with a range of stylish stainless steel covers and finished in a variety of colours to suit any location.

View the crash tests on our YouTube channel here:

Mantis 64 test

Mantis 80 test

Mantis Array test

IWA 14 Tested Bollards
PAS68 Tested

Configurations & Technical Specification

Performance rating:
Mantis 64: PAS68:2013 Fixed Bollard V/7500(N2)/64/90:0.0/0.0
Mantis 80: IWA-14-1 V/7200(N3C)/80/90:7.5
Mantis Array: IWA-14-1: 2013 Bollard V/7200[N2A]/80/90:3.5

Bollard height: 1100 mm

Bollard Width:
Mantis 64: 200 mm (excluding covers)
Mantis 80: 190 mm (excluding covers)

Options: LED Lighting and alternative cover colours and patterns available.

Foundation depth: 250 mm – 300 mm

Mantis 64 Data Sheet

Mantis 80 Data Sheet

Mantis Array Data Sheet