Manual Arm Barrier

Heald’s Manual Arm Barrier is the ideal product to aid with traffic management and are suitable for use in areas such as car parks, airports and traffic control areas.

Our manual security barriers open easily on sealed bearings with either a raising or horizontal swinging motion depending on site requirements, as well as a counterbalance to ensure easy operation.

Barriers are lockable in both the open and closed positions.

Heald’s raising and swinging manual arm barriers are all manufactured from heavy duty steel and aluminium. Aluminium models are available in lengths of 3 - 8 metres for the raising barrier and 3 - 9 metres for the swing barrier.

A heavy duty steel version is available on both models between 3 - 6 metres. All models are supplied with a quality padlock and are available with bottom skirts for added security.

Configurations & Technical Specification

Manual Arm Barrier

Beam:
Raise : Aluminium box section 100 mm x 50 mm x 3 mm box section (3 m – 8 m length)
Raise : Heavy duty steel 120 mm x 60 mm x 3 mm box section (3 m – 6 m length)
Swing : Aluminium box section 100 mm x 50 mm x 3 mm box section (3 m – 9 m length)
Swing : Heavy duty steel 120 mm x 60 mm x 3 mm box section (3 m – 6 m length)

Pivot Post:
Raise : 150 mm x 100 mm x 5 mm box section
Swing : 120 mm x 120 mm box section

Pivot Post Base Size:
Raise : 600 mm x 500 mm x 10 mm deep
Swing : 400 mm x 400 mm x 10 mm square

Catch Post/Retaining Post:
Raise : 80 mm x 80 mm x 3 mm box section
Swing : 80 mm x 80 mm x 3 mm box section

Catch Post/Retaining Post Base Size:
Raise : 250 mm x 250 mm x 10 mm deep
Swing : 250 mm x 250 mm x 10 mm deep

Manual Arm Barrier Data Sheet