Automatic Security Barriers
The Automatic Arm Barrier is a cost effective solution to controlling parking. Designed to be used in conjunction with a variety of entry systems, e.g. Time clock, proximity card etc, the heavy duty automated arm barrier is suitable for high traffic volumes. Alternative colours available on request.
Heavy duty version available in beam lengths of up to 8 metres and standard duty version available up to 6 metres.
Specifications
| Composition: | Welding in accordance with BS 4872. | ||||||||||||||||||||||||||||
| Cabinet (Heavy Duty): | 1070mm high x 640mm wide x 400mm deep. 3mm Zintec steel sheet. Large access door with integral lock. | ||||||||||||||||||||||||||||
| Beam (Heavy Duty): | 100mm x 50mm Aluminium box section. | ||||||||||||||||||||||||||||
| Cabinet (Standard): | 1170mm high x 320mm wide x 300mm deep. 3mm Zintec steel sheet. Large access door with integral lock. | ||||||||||||||||||||||||||||
| Beam (Standard): | 76mm OD Aluminium tube. | ||||||||||||||||||||||||||||
| Motor: (Heavy Duty) (Standard) | 0.37kW Three Phase geared motor. 0.18kW Three Phase geared motor. | ||||||||||||||||||||||||||||
| Duty Cycle: | 100% rated. | ||||||||||||||||||||||||||||
| Power Requirements: (Heavy Duty) (Standard) |
240V/1 phase/50Hz or to suit country requirements. 230V/1 phase/50Hz or to suit country requirements. | ||||||||||||||||||||||||||||
| Controls: | State of the art PLC with overload protection and inverter. | ||||||||||||||||||||||||||||
| Additional Features: | State of the art slow-down and positioning feature (energy efficient). Motor capabilities of fast or slow movement. Adjustable limit switches for accurate raised and lowered positioning of arm. Arm will move through 90° to give vertical rest position of open barrier. | ||||||||||||||||||||||||||||
| Finish: | Cabinets finished in blue (RAL 5002). Beams finished in white with red reflective stickers as standard (Alternative colours available on request). | ||||||||||||||||||||||||||||
| Safety: | Manufactured to exceed BS 6571. It is always recommended that safety loops, Photocells and warning signs be used in conjunction with the Automated Arm Barriers. | ||||||||||||||||||||||||||||
| Inductive Loop Cable: | 1.5mm type 4A BS 6195. All loops to be back filled with hot bitumen. Loops must be completely sealed to protect from moisture and water damage. | ||||||||||||||||||||||||||||
| Sitework: | Full installation service available. Technical guidance is offered for those customers wishing to undertake their own installation. | ||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||